[kuskye25]

Really loving the spoiler addition on the hatch. As I approached my car after work it looked so sick. I liked it a lot when I put it on. But its growing on me even more as time passes.

Also they do make the splitter and rear spoiler in Black. Its sturdy enough you could paint it whatever color you want as well.

 

[44168]

Very unique look and you've really personalized it. Great job and nice pics--thanks for sharing.

 

[kuskye25]

In black they are significantly cheaper. These are Matte, but you can get gloss as well.

Black rear wing:
Fits 22-23 Hyundai Ioniq 5 Matte Black Rear Window Roof Spoiler Wing 3PCS ABS 840355557503 | eBay

Black splitter:
Fits 22-23 Hyundai Ioniq 5 Matte Black PP Front Lip Splitter IKON Style 3PCS 840355557442 | eBay

 

[kuskye25]

Very unique look and you've really personalized it. Great job and nice pics--thanks for sharing.

Thanks

 

[kuskye25]

I took the time today to set the wiring properly on my headlight light bar.

The Diag port is just clipped on, you can use your fingernail and pry it off.

Once you pull it off the metal bracket you can use a knife and pop open the bottom cover that hides all the wires. I have highlighted the Pins I used "Far pink and Black". It is 12v switched power. So if the car is on the light is on. That is exactly what I wanted, always on. You do not want to use the red, the red is a constant live wire, its not switched by the ignition.

Now strip some of the shielding off the far Pink wire and the Black wire with a razor.

Now grab your favorite soldering iron. Personally I use an xt60 soldering iron that takes hakko tips. It can take up to 4s lipo "16v" and works as good as my soldering station in my house. Dirt cheap and freaking amazing. I use Radio Control lithium polymers to power it. The one shown is a 6700mah 4s LiPo, you dont need this beefy of a power supply lolol, this battery goes in my X-Maxx 8S.
https://www.amazon.com/Cohvolr-Port...ics/dp/B0B6RDX7Z7/ref=sr_1_7?keywords=xt60+soldering+iron&qid=1696106001&sr=8-7

Now put some solder on the wires of the diag port, then put some on the wires of the light bar. Then hold each wire to the spot you shaved on the diag port and solder her up. As you can see I opened up the big red wire and found out its 100% always on power. Not what you want.

Now that the wires are soldered grab urself some liquid electrical tape. Not only is it easier, but its waterproof. I use it on high end electronics all the time to make them submergible in water while operating.
https://www.amazon.com/Gardner-Bender-07315001126-LTB-400-Electrical/dp/B000FPAN2K/ref=sr_1_1_sspa?crid=2UOZXENL3AA8H&keywords=liquid+electrical+tape&qid=1696106343&sprefix=liquid+ele,aps,102&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

 

[kuskye25]

Now snap it all back together. And slide it back on the metal bracket. UR DONE SON!!!!

Old pic:

LED Lightbar used:
https://www.amazon.com/gp/product/B0B6P3KJCB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

 

[sfogel2]

I just installed the charge port cover. Good quality and perfect fit. Nice!

 

[kuskye25]

I just installed the charge port cover. Good quality and perfect fit. Nice!

Awesome man! The charge door cover really adds a nice accent on these cars.

 

[kuskye25]

Well this is not the special thing from China that's coming. But none the less nice little addition. They used to be $27 now they are $17.
https://www.amazon.com/dp/B0BHKWHNV7?ref=ppx_yo2ov_dt_b_product_details&th=1


Please excuse the rain drips. They do really look bad on these particular door panels, Ya'll know what I'm talkin' about.


These fit super good and don't interfere at all with the door handle!! Again as with all these ABS parts, use shoe-goo as well as the double sided tape to bond it to the vehicle!!

 

[kuskye25]

Ok Ok.... I done did it!!!!

YaY I can see my rotors/calipers, haha. Tire pressure sensors were able to be reused.

Rims are 20" and tires are 245's....

BOOOOMMM!!!!! NAILED IT!!!!!

 

[kuskye25]

Poor old rims..... I listed them on FB marketplace but if anyone is interested PM me. Not a single scratch, scrape, dent, ding on them, perfect condition. Buyer would be responsible for any packaging or shipping if not purchased locally, Chattanooga, TN area. Googlepay only!!! Or purchase on the market place!!!

Marketplace Ioniq 5 Rims

 

[kuskye25]

Mods to Date!!!

 

[kuskye25]

Updated List of Mods:

Some things you will need to wait for stock status as I did, contact the seller or look elsewhere!! Some of these sell fast!!

Splitter: Fits 22-23 Hyundai Ioniq 5 Carbon Fiber Print IKON Front Lip Splitter 3PCS PP 840355557466 | eBay
Rear Wing: Fits 22-23 Hyundai Ioniq 5 Carbon Fiber Print IKON Roof Spoiler Visor 3PCS - ABS 840355557558 | eBay
ABS CF Dash: https://www.amazon.com/gp/product/B0B46DDGC3/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
ABS CF Cup Holder: https://www.amazon.com/dp/B0BHKY2G8S?psc=1&ref=ppx_yo2ov_dt_b_product_details
ABS CF Mirrors: https://www.amazon.com/dp/B0B6R9NLHL?psc=1&ref=ppx_yo2ov_dt_b_product_details
ABS CF Charge Door:https://www.amazon.com/dp/B09YY98YW5?psc=1&ref=ppx_yo2ov_dt_b_product_details
Mud Guards: https://www.amazon.com/dp/B0BWJ61W8K?psc=1&ref=ppx_yo2ov_dt_b_product_details
Magnet Board Cover: https://www.amazon.com/dp/B0BGPNGHL8?psc=1&ref=ppx_yo2ov_dt_b_product_details
Magnet Hooks: https://www.amazon.com/gp/product/B09WN2ZYC3/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&th=1
V2L Adapter: https://www.amazon.com/dp/B0BKL3DL5L?psc=1&ref=ppx_yo2ov_dt_b_product_details
USB-A to USB-C: https://www.amazon.com/dp/B092JNHDSB?psc=1&ref=ppx_yo2ov_dt_b_product_details
LED Light Bar: https://www.amazon.com/gp/product/B0B6P3KJCB/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Sub/AMP Combo: https://www.amazon.com/gp/product/B09RVH8H59/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Line Out Converter: https://www.amazon.com/gp/product/B001EAWS3W/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
20" Rims: https://www.vividracing.com/-p-1525...BhA9EiwAMzmfwXsEYHAhFXSjQfz83gS-0aEAFL5zZ2Zucj_3z4jQUeNXLYY-BtusdRoC-PEQAvD_BwE
Vinyl Decals: https://www.amazon.com/gp/product/B0BT9NZKX1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Vinyl Application Kit: https://www.amazon.com/gp/product/B07GFGFY2L/ref=ppx_yo_dt_b_asin_title_o07_s00? ie=UTF8&th=1
Vinyl Application Spray Bottle: https://www.amazon.com/gp/product/B07RJD37PQ/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
ABS CF Inner Door Handles: https://www.amazon.com/gp/product/B0BHKWHNV7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Center Console Organizer: https://www.amazon.com/gp/product/B0B1HM226C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Black Screen Bezel: https://www.amazon.com/gp/product/B0BQZM9WX4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
Double Sided Tape: https://www.amazon.com/dp/B0852XL3CC?psc=1&ref=ppx_yo2ov_dt_b_product_details
Shoe Goo: https://www.walmart.com/ip/Eclectic...ive-Glue-Shoe-Repair-Clear-110010-3-7-fl-oz/373300159?athbdg=L1200&from=/search
ABS CF Emblems F/R: https://www.amazon.com/gp/product/B0BTT73ZQT/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&th=1

 

[kuskye25]

I totally forgot till looking at my rims today that I got black lug nuts. I've not had black lugs before haha. Nice little extra detail, def recommended and they were the same cost.

 

[kuskye25]

Sorry, nerd specs I forgot to include. The rims are Liquid Metal Splice, around $225 each. Each 20"x9.5 wheel is 5lbs lighter than the stock 19"x7.5 SE's and has a load rating of 1800lbs. Tires are 245/45ZR20 all season and pretty grippy. It does feel nimbler with the lower sidewalls and less unsprung weight but still a very comfy ride. I got a buyback on my tires so that helped out the cost as well. I got $60 a tire buyback and got the rims for a kind of overstock price of $180 each. Out the door with tax, mounted and balanced, rims/tires $1650.

Pictures of the rims on the car look nice. It's much better in person. It's one of the first things people point out when having a conversation now. Ecstatic with the purchase and upgrade.

 

[kuskye25]

Delicious!!!! Them ones where you can see the interior though, OMG!!! <3

She will be keeping it blue for sure. Just figured i'd show red too.

It was quite unpleasant to DIY. Also I had to extend many of the wires, most wires are 3 wires in one shielding, just a heads up!!!

 

[kuskye25]

 

[kuskye25]

Well some of the reason we test things ourselves. My findings of what you would call Non-EV Rims and Tires.

I didn't loose a lick of fuel economy and the road noise is the exact same as the factory installed tires. I was certain one of these things would be true, but after a little over a week of use I guess it doesn't matter.

 

[kuskye25]

Well I did a full underglow kit. Kinda nice that I did the rims as normally they are pitch black. 12 light bars on the outside now, and 4 on the inside.

 

[kuskye25]

It had 2 6" led bars per rim. This added a 24" under the front splitter, a 24" under the rear bumper, and a 24" led bar under each side skirt. Since the wiring was already present from the rim led install it was much easier this time. I also toned the blue behind the rims down via rgb to match the blue bars added. Before it was more of a auqa. This is a nice deep blue now.