Hyundai IONIQ Forum banner

Aftermarket Wheels

44K views 42 replies 22 participants last post by  david_5203  
#1 ·
Trying to research new aftermarket 20" wheels, maybe even 19". But for 20", aftermarket wheel offsets (without customization) seem to be way too aggressive. I measured my 20" tires (not wheels) to fender, and the front has about 3-4mm available to go out before poking out too much, and the rear had about 7-8mm.

Please post your aftermarket wheel setups and tire/wheel size. 17" or 18" wheels also welcome!

19": Tire 235/55R19 Wheel 7.5Jx19 ET49.5
Image



20": Tire 255/45R20 Wheel 8.5Jx20 ET54.5
Image
 
Discussion starter · #3 · (Edited)
Seems like EV6 and GV60 wheels are same size and offsets as I5, so would fit. Here are two GV60 wheels, 20" and 21". I like the 21" design, but wonder the loss of performance/efficiency. The Limited 20" wheels are starting to grow on me though.

255/45R20 8.5Jx20 ET54.5
255/40R21 8.5Jx21 ET54.5

Image


Image


Image
 
Discussion starter · #11 ·
Anyone change to OEM 20'' wheels?
What did you bought, technically speaking?

I'm hesitating to buy the wheels I like beacause the offset isn't the same:
Wheel Diameter -- 20 in.
Wheel Width -- 8.5
Offset -- 40
Relating to the Genesis GV60 wheels I posted earlier, the wheel offset website wheel-size.com isn’t accurate, Korean sites show them with et43.5 offset, so there goes that.

Which wheels are you looking at? With that offset, it will stick out 14.5mm. Depending if you are ok with the look, also if any issues with rubbing, would need to go to narrower tire probably 245’s.
 
Discussion starter · #12 ·
Anyone change to OEM 20'' wheels?
What did you bought, technically speaking?

I'm hesitating to buy the wheels I like beacause the offset isn't the same:
Wheel Diameter -- 20 in.
Wheel Width -- 8.5
Offset -- 40
It should be almost the same as rwilson’s setup up top, except 20” wheels.