Hyundai IONIQ Forum banner

No display control (alignment/position) for HUD in 2023 MY?

Tags
hud
1 reading
11K views 26 replies 10 participants last post by  edarrossi  
#1 ·
Hi folks,

I took possession of a 2023 US spec Limited this weekend. I was looking to adjust my HUD position like in the video below, but in my menu these features don't exist! Was this removed for the 2023 MY? Do I need a software update? I've included a screenshot of the missing feature in addition to my software version.

Thanks!

 

Attachments

#2 ·
Does the brightness bar work, even though the display control is greyed out? Almost like if you finish selecting brightness, does the display control come back?

Seems like the display control is not greyed out here (but, it's a 2022):

Just super curious, my limited is still on "order", someone else can probably just try to duplicate for you as the '23s arrive.
 
#5 ·
The screen shot with the red circle is from the youtube video and the red circle shows what is missing on my '23. I'll take a picture this eventing showing what my screen shows, but it seems that maybe this features (in addition to brightness) was removed from the '23s as Sid3ways doesn't have it either.
 
#13 ·
Missing from our '23 Limited as well. I prefer the standard HUD display and I need it raised a little bit. The speedometer in the HUD is getting cut off unless I am sitting with perfect posture. I would like my seat a little lower but that is not an option if I want to see the HUD.

Our 2019 Kona has a HUD that was completely adjustable. Our Mazda and GMC HUDs were completely adjustable. Makes me wonder if Hyundai has outsourced their software development to the local high school.

Don't get me started on the unlock notifications and profiles.

Image


Image


Image


Image
 
#16 ·
Hi,

Would you recommend going through the whole USB software update or just wait for the OTA update to become available? (ie which way did you do it?). I would prefer to use the in car OTA process if possible to avoid screwing anything up via the USB update, but if that isn't possible then I am willing to give the USB update a try. I tried checking for the OTA update this past weekend and it wasn't showing up, but I believe you have to drive the car for a bit for it to be willing to do accept there is an update. If you have any suggestions here, please let me know. Thanks!
 
#24 ·
I believe the updates take much longer than that. As suggested in this thread I left it overnight and it was there the next morning when I got in. Can you confirm the version of the software?

The update site says the Oct update should have this date: V009.001.221115

I can go check the car's version if yours doesn't match.