nope. we have been trying also. the problem is with doing the dealer mdoe / engineering mode, with the volume lvl trick 7-3-1 , is that we need to confirm with the right knob. and ioniq 5 doesnt have right knob.
so its probably a touch on the screen somewhere

 

Does the 7-3-1 not work when touching the screen to the right of the "update" button in settings like in the 2020 Ioniq that doesnt have the right nob?

 

thanks, I'll keep trying...

 

what is the full sequence to try?

 

Go into settings to the screen that shows system info and the update button on the bottom then turn volume to 7 press on the screen in the position indicated below. Then turn volume to 3, press again then turn volume to 1 and press again. Should bring up a screen asking for a code.

 

Have just tried this without success. The layout of the text is slightly different to the above although the update button is the same position

 

The ioniq 5 touch press must be placed somewhere else I guess. I guess tmots trial and error

 

So let's say one manages to enter "engineering mode". Then what? Just curious. Sounds dangerous and fun!

 

It's like going into the control panel of a windows machine . You might find small thing you can tweak and other stuff which you must not touch

 

To get out of engineering mode it may ask you to press another non-existent button...

 

Did you manage to get in the ioniq5 engineering menu?

 

No, just joking that getting out again might not be obvious given the difficulty of getting in.

 

Haha

 

I can't find it on the title bar anywhere, after quite a few tries in different areas

 

Perhaps I'm doing it wrong...I tried pressing the 'General Settings' text between key presses without success

 

Ah, now I see what's wrong. Your head unit is Linux (judging by that S5W_L), mine is Android (it says "Android 4.4.2" in Engineering Mode)
Have you tried this method in the pic below? (this isn't my car, the pic is from XDA-Developers, and it shows a Linux head unit just like yours):

 

I get this.

 

Try releasing ‘media’ right after the 3rd message like seen here:

.

Maybe it tries to read the usb because you’re holding ‘media’.

 

Maybe someone can try and search for 엔지니어링 모드 on YouTube and try entering engineering mode from the videos seen. It’s a simple Google translation of ‘engineering mode’ in Korean. There are a few different methods seen in the videos. Maybe one works.

The Hyundai Sonata work should maybe work.

 

Ok...but I don't get the 'screen capture enable' message pop up when I press the 5x/7x (or 17x) as above so wondering if it's something else to press.

 

The car screen shows ‘Screen Capture disabled’. The subtitle is wrong.
Don’t you see the disabled message?
But you do see the Korean messages after holding media?

 

Yes, after pressing the left/right keys I don't see the pop up disabled message at all

 

anyone that got into the engineering mode, do you see if there is a wifi modul listed?

 

i try also in my ioniq 5
i spent on it 1 hour.. :{

 

it has to be somewhere . i have seen engineering mode on kia ev6. but thats because it has a right knob.
they both use the same software anyway.
but someone must have tried with a " no right knob " dealer mode on other models

 

my finger is RiP

 

Maybe one of the possibilities of this site works?

 

i try it, not working :{

 

another thing. since the june update they have closed down the usual enginering method access.
so now only dealer mode is available.
and thats the one we need to find.

 

@SonicSpinner I get a password popup, using this recipe:

Dealer Mode (Diagnostics, Location, Media, Radio, Smart Pure Air Version Info/Update)

1. Press the Setup button or choose All menus -> Settings
2. Choose System Info
3. In a quick sequence set volume using left knob to level 0, then to level 7 and press the right knob, then set volume to level 3 and press the right knob, then set volume to level 1 and press the right knob
4. Password is 2400
5. Choose Send

In the IONIQ 5 the "right knob" is the up/down lever, which can also be pressed (beside the tune text). However password 2400 is not recognized, also not 2900.

 

Well done!

Try the pass 0625 or 0428

 

@SonicSpinner I tried those, and also tried the passwords in this post. No luck, also not with the 24 hour time as password.

 

I might have gotten it wrong try 0652 instead of 0625

 

Getting closer and closer. Nice!
Will be able to try as well in 2 weeks when I get my car delivered.
Maybe try the current time as password in 24hour notation if you haven’t tried that yet.

 

Try 1200
Then 2400.

 

I will try also also later.

 

No luck with 0652, last 4 digits software version, 1200-2400

 

Dammit. They must have changed it on the August version. Coz in the July version, the 0625 worked on kia ev6