Hyundai IONIQ Forum banner

IONIQ 2020 38kWh - dead 12V battery story

1 reading
6.3K views 21 replies 13 participants last post by  DaleSanDiego  
These 2 options may have different sized terminal posts. My '38 wants UK sized posts, these arer larger than the slim Japanese size. Shims are available to convert ...
I buy my replacements from tayna.co.uk, and they show the terminal sizes & layout.
Battery Wizard - Enter Dimensions to find your Battery is their link to find options based on the dimensions.
 
  • Like
Reactions: KevinT
I may have found two options which may work. Neither has the cosmetic lip at the bottom of the existing battery allowing me to keep it held down but I assume there is a solution around that.

Napa BPF151R6
MotoMaster 151r

Question about terminal positioning, forgive me if it's a silly one...but couldn't I just rotate the battery so it aligns with the configuration of the car?
There's quite a bit of gadgetry hanging off the 2 terminal posts that I rather doubt the leads would reach. It's night-time now, so a bit too late to look. But here's a top view of mine. Ignore the extra battery at the bottom - my home-brew booster pack. The chunky leads from main 12V go towards the cabin, so I can't see them stretching across each other if you get the mirror-reflection terminal layout, or reaching towards the front of the car if you try rotating it.
Image
 
  • Like
Reactions: KevinT
Hmm. After more than 40k miles with no issues, mine has now died twice this week...
Was yours the original battery? If so, after 40k mile and several years, time for a new one anyway I suspect. Hunt around in here for the details of Yuasa that works well. I buy from tayna.co.uk and you might need shims to make the posts up to UK sized ones, if the battery you choose has Japanese (smaller dia) ones.
 
  • Like
Reactions: KevinT