Just tried to install on a Hyundai Ioniq hybrid 2020 widescreen and it was working fine for a few minutes but now it just hangs and is unresponsive. I'm going to roll it back if I can until it's confirmed to be working properly. I just wanted to know if they'd added widescreen android auto which I couldn't find, but they have given it split screen functionality unless that was on the last version too as I updated straight from 3 panels to this. Car was delivered last month with out of date software, the nerve!

 

Without sounding dumb. Does this mean we can d/l and install ourselves without bricking the system.

My Volvo can be updated this way for instance.

 

Exactly. However this is not the official euro release but it's still compatible with euro.

 

Some info for viewing:

 

Thanks SonicSpinner

 

Wow you're fast! However I think i'll wait until the official euro widescreen update is available. Thanks SonicSpinner!

 

Updated and all working fine including the maps here in the UK, will have to check some roads later on to see if speed limit signs have been updated.

I don't seem to have the ability to launch the app manager anymore though, holding setting button down dosnt bring it up.

EDIT: scratch that, it randomly came up when I tried in the general settings menu holding the button down there haha.

But yeah, works fine for us 28kWh Ioniq's and I'm in the UK.

 

Updated and all working fine including the maps here in the UK, will have to check some roads later on to see if speed limit signs have been updated.

I don't seem to have the ability to launch the app manager anymore though, holding setting button down dosnt bring it up.

Restart the headunit one time and try again

 

OK so I dived in and did the update

All OK so far. Took 10-15 minutes all in to install the 3 files. It says Map version is Russian but it showed my exact location at my house. I haven`t tried to Navigate yet but will tomorrow.

One new thing (or at least I`ve never seen before) was the pre-installed chill-out sounds.

Thanks again @SonicSpinner for everything you do with these updates.

Latest versions

New sounds

 

Cool good job.

The name RUS can be fixes. There are 2 bin files in the maps which can be opened with notepad and change the name

 

Been on a drive today, the speed limit signs on the route taken today have been correct in the past and they are in this update too except that ... For example, a 30mph limit sign shows as 29 on the car nav screen, 40 shows as 39, 50 shows as 49 etc. I guess it's a rounding error when converting from kph to mph? It's fine I can drive like that, just a bit OCD about it haha.

 

Been on a drive today, the speed limit signs on the route today have been correct in the past and they are in this update too except that ... For example, a 30mph limit sign shows as 29 on the car nav screen, 40 shows as 39, 50 shows as 49 etc. I guess it's a rounding error when converting from kph to mph? It's fine I can drive like that, just a bit OCD about it haha.

Haha well that's interesting. Hmmm
Let's see when euro files comes if it makes any difference. But I doubt it. Could be a typical hyubdai bug

 

I updated the firmware from the Google Drive link. Took about 15 minutes to update. It looks like it went successfully, since the SW version is now 210111 and FW: 210101. After the update, I got "navigation initialization failed. Please check the SD card and try again." I also tried with an other cars, but same error. Do I need to do something else? Maps are probably still late 2020 (previous update).

 

You need this new map

MAP.EUR.13.47.47.642.101.zip

drive.google.com

 

Is there any difference in the SW for a Danish/Scandinavian Ioniq?

Right now my system is:

 

Not at all. Notice your software also has EUR in the name.

 

I switched to metric speed readings on the Nav settings and it also shows incorrectly less then what speed limit signs should say? Is this just a bug in my 28kWh Ioniq? 48 kph signs exist? 😂

 

can you show an image of what it looks like on your navi? those bugged kph numbers.
thanx

 

I downloaded the software with the Navigation Updater program. How can I install? In the past I first installed the updates, then I copied the maps to the SD. is that still the way to do it? Because the standard SD card in my Ioniq is only 16Gb I think.. Or do I have to use a bigger (32Gb) SD card from now on?

Second question, I read people have problems displaying the correct speed limit.. is this a bug?

Regards from The Netherlands

 

the standard org SD card from hyundai is 32 gb. at least mine is.
you can now place both software and maps into 1 sd card. So the root of your SD card must look like this

slide it into the car and press update. once its done, it i will update and load the new maps too.
i dont have any bugs with speed limits signs in the nordic. Must be something Uk related.

 

I have reuploaded the file for ioniq and maps

software: Smash

Map: Smash

 

Excellent work! That’s really fast

 

Hello SonicSpinner,
thank you very much!

A question: what will happen, if I will update my head unit sw version 191209, which has AppManager AND IoniqInfo installed?
Only these 2 apps are on it.
Will I brick the headunit?
Do I have to make the factory reset before update in this case also?

Thanks
MN

 

Hello SonicSpinner,
thank you very much!

A question: what will happen, if I will update my head unit sw version 191209, which has AppManager AND IoniqInfo installed?
Only these 2 apps are on it.
Will I brick the headunit?
Do I have to make the factory reset before update in this case also?

Thanks
MN

yo my man. do this:

1. delete ioniq info
2. delete any other 3rd party apps
3. keep only app manager.
4. update your car
5. when its done, hold the setting button, to launch app manager
6. open the full engineering menu, a choose ADP opton and enable ETHERNET
7. now you can install apps again.

 

I just installed the update and new maps, worked great.

From what date are the maps? Still showing 120 km/h as max speed in The Netherlands, but it is from 06u-19u 100km/h everywhere now.. since over a year !

 

The Tom Tom map data are usually behind 1-2 years.

 

Hey, do these update files work on a 2018 Hybrid Ioniq, or is it just for the EV?

 

Every ioniq brand and model.

 

@SonicSpinner Do you know what the MKBD-Version is for?

 

what is mkbd?

 

Thank you.

Should I use a new/empty SD card, or the one in the car?

 

you can use the same, format is and copy over.
when done, format it again and prepare the new update. but install appmanager first.
2018 version app installaation is through screen saver trick, youtube; Hacked hyundai headunit, from kompkiller

 

Everything went well also on the Italian version, this is the result:

 

Hello there,

My vehicle is 2017 ioniq hybrid. I want to update my vehicle software and map, I live in Turkey. Is it enough to download and install the following files?

 

Yes exactly

 

Hi SonicSpinner

I use for my Hyundai Ioniq the updates you have in your repository with the name "Hyundai_LGE_2020_2", I appreciate it very much.

I am trying to update the "Hyundai_LGE_2021_1" but I don't know what to do with the SOP file "upgrade.lgk".

I put it in the SD and it does not recognize it as an update.

Please could you help me?

Thank you very much and best regards.

 

Hey buddy
Make sure your sd card look like this

The Caveneu_h folder is here

SOP.010.6.210111.zip

drive.google.com

The rest of files (maps) are here

MAP.EUR.13.47.47.642.101.zip

drive.google.com

 

@SonicSpinner Thanks for the files!


I updated today as my workshop missed it at service last week and I was still on the 19 update. Ioniqinfo got reset but works out of the box. Appmanager and the associated shortcut to eng-mode app works too, seems a littlr buggy to get into appmanager, it sometimes goes to the versions screen. ABRPtransmitter however seems to shutdown on starting, not got it working yet. Gonna see if leaving it alone overnight after clearing data/cache will rectify otherwise ill reinstall it tomorrow, I had the latest no-map verson installed.

I could not find anything new in the update, hopefully the music shuffler algorithm has been improved, but I guess updated maps are nice too...

 

Reinstall it, it's best. Also note that keyboard on 3td party apps are bugged now. You can't see what you are typing, but it's typing. So when you have to enter your abrp token to login first time, pray that you write it the first time hahs

 

Updated well but after opening the app manager I got the stock android UI buttons going. If not remembering wrong this happend before and we knew a fix?!

 

Not sure what you mean. Is that the CTS menu you are talking about? If yes you should be able to disable it on the engineering menu full, under adb and CTS menu

 

My newly updated maps show national speed limit 1mph slow.
Any idea's??

 

I read that others have this bug too in UK . We have to wait and see the official hyundai files releases then see if it's fixed or it is a general bug

Hopefully it will be rlsed within weeks